Vertical Injectors
A vertical injector is a the ideal piece of equipment on a worksite when consolidating , anchoring, injecting valve pipes (manchettes), transferring liquid components in tunnels and filling with cement or bentonite grout.
It uses a single-action piston, which is operated by a hydraulic control unit which has independent settings for low (injection) and high pressure (sleeve grout breakage).
Here the table with the specifications relating to the models Vertical Injectors:
| Elena 80/200_ETH | Elena S_110_ETH | Elena S_115_ETH | Elena SB_ETH | ELENA PLUS_ETH | ||
| Width | mm | 800 | 800 | 800 | 800 | 800 |
| Length | mm | 560 | 560 | 560 | 560 | 800 |
| Heigth | mm | 1800 | 2000 | 2000 | 2000 | 2000 |
| Weight | kg | 300 | 450 | 450 | 500 | 800 |
| Max. flow rate | l/min | 35 | 60 | 70 | 70 | 75 |
| Flow rate per cycle (theoretical) | l/ciclo | 1 | 2 | 2,3 | 2,3 | 2,5 |
| No. of cycles | cicli/min | 35 | 30 | 30 | 30 | 30 |
| Low pressure | bar/Mpa | 70 | 50 | 50 | 60 | 80 |
| High pressure | bar/Mpa | 120 | 60 | 60 | 80 | 110 |
| Engine power | kW | 5,5 | 7,5 | 7,5 | 11 | 15 |
| Inverter | / | YES | YES | YES | YES | YES |
| Voltage (multivoltage) | Volt | 400/480 | 400/480 | 400/480 | 400/480 | 400/480 |
| Frequency | Hz | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 |
| Power source | / | three-phase | three-phase | three-phase | three-phase | three-phase |
| Ethernet PLC | / | SI | SI | SI | SI | SI |
| Touch screen | / | SI | SI | SI | SI | SI |
| Hydraulic circuit cooling | / | air/oil | air/oil | air/oil | air/oil | air/oil |
| Piston cooling | / | water | water | water | water | water |
| Aspiration | Inch | 1-1/4" | 2" | 2" | 2" | 2" |
| Discharge | Inch | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" |
| Possibility of Downgrading to the Electromechanical Panel | / | upon request | upon request | upon request | upon request | upon request |
Contacts
You can fill out the form. We will contact you as soon as possible
Other types of products
Piston pumps are designed for the injection or pumping of cementitious mixtures.
Agitators, or secondary units are designed to store grouts made from cement, bentonite or multi-products
High shear mixers are designed to prepare cement and bentonite grouts both manually and automatically.
An assembly can be made of a group of machines, that can be of the same type or different group of machines.
